Resolve Linksys Smart WiFi Can't Connect To Router Issue In Easy Steps

Are you facing issues with the Linksys router? Is your Linksys Smart WiFi Can't Connect To Router? There is no need to worry. This blog will let you know the reasons for Linksys Smart WiFi Can't Connect To Router. Moreover, you will get to know about the easy steps to resolve it. Here you have a quick guide to connect your Linksys Smart WiFi to the router and get uninterrupted internet service. This guide is easy to follow, and you can easily resolve your issues with Linksys Smart WiFi. So, just follow the steps mentioned in the coming sections, and make your Linksys Smart Wifi working again.

Steps To Resolve Linksys Smart WiFi Can't Connect To Router


In this section, you will find the reasons and solutions altogether. You will get to know about the reason because of which the issue is coming. Along with the reason, you will also get to know about the steps you should follow to eliminate the reason. So, let’s get started with the reason and the solutions simultaneously.


Reason 1: Distance Between Router and System Is Not Appropriate


It is very important that your system and router should have a minimum distance during the setup. If the distance would be more than 10 feet during the setup, then there are chances of interruption. Also, the other cordless device’s signal can also interfere with this. So, to avoid this reason, follow the instructions mentioned below:


  1. Keep the distance between the router and system to the minimum like in the same room.

  2. There should be less interference of cordless or microwave devices and they should not be near the router.

  3. You can change the channel for your Linksys Smart WiFi. For this, you should do the following:

  • First, complete the signing for the Linksys Smart WiFi account.

  • Then, select the option of the Router settings.

  • Under that, select the option of WiFi settings.

  • Now, the next screen will appear, click on the Basic tab.

  • From the Basic tab, you will find the Edit link for the WiFi Settings.

  • Now, change the WiFi name and the WiFi password for your Linksys Smart WiFi.

  • Then, click on Apply and after that the Ok button to save and apply the settings. 

  • Now, disconnect all the connected devices, and connect them again with the new settings.


Reason 2: You Are Trying To Connect It With The Incorrect Password


The other reason is that you have changed the WiFi settings as mentioned above, but connecting with an older password. To rectify this issue, go with the following steps:


  1. Disconnect your system from the router’s network.

  2. Then, try again to connect it with the newly changed password.


Reason 3: The Adapter Drivers In Use Are Outdated


The wireless connectivity works well when the adapter drivers that are in use are updated. So, to resolve the outdated adapter driver issue, you should follow the given below instructions:


  1. Check the latest specifications for the adapter drivers as per your Linksys Smart WiFi standards.

  2. Then, download the latest files for the adapter drivers.

  3. Then, install them using the onscreen instructions and get connected with the router again.


Reason 4: You Have Filtered The Mac Address For The Router


You have applied MAC in the Access Management in the router settings. In that case, the router will allow connecting to those devices only for which the Mac address has been saved in the settings. To update this, go with the following steps:


  1. First, login into the router’s sign-in page in your favorite browser.

  2. Then, on the dashboard, select the option of the Wireless.

  3. Under that, select the option of the Wireless Mac Filter.

  4. Click on the Enabled radio button for the Mac filter.

  5. Next, click on the radio button for “Permit PCs listed below to access wireless network”.

  6. In the Enter MAC Address list, enter the MAC address for your system.

  7. Click on the Save button to save and apply the settings. 

  8. Now, try to connect with your router again.


Reason 5: Update Is Required For The Router’s Firmware


If the router firmware is outdated, then also connectivity issues arise. So, to update the router’s firmware, go with the following steps:


  1. First, find the model number and serial number for your router. Generally, it is present at the bottom of your router.

  2. Then, from the Linksys official website, download the latest firmware for your router’s model.

  3. Then, log in with the IP address “192.168.1.1” in your system.

  4. On the successful login, you will be on the Administrator Setup Page.

  5. Click on the Administration tab, and select the option of the Firmware Upgrade.

  6. Then, click on the Browse button and choose the downloaded file from the newly opened window.

  7. Click on Open, and then click on the Start Upgrade button.

  8. Don’t interrupt in between when the up-gradation process is going on.

  9. Click on the Continue button once the update is complete.

  10. Turn off your router for some time, and then turn it ON again.


Reason 6: Reset Of Router Is Required


There are some settings that may resist the devices from connecting to the routers. In that case, you should reset the router to bring back all the settings again to the default state.


  1. Locate the Reset button on your router.

  2. Then, press the Reset button with some needle-like object.

  3. Then, keep it pressed for 7-10 seconds, or wait until all the LEDs go off.

  4. Now, release the Reset button, and turn on your Linksys router again.

  5. Try again to connect Linksys Smart WiFi to the router’s network.


So, these all are the steps according to the reasons that you should follow to rectify this issue.


Connect The Linksys Smart WiFi!


Now, there won’t be any more issues with Linksys Smart WiFi Can't Connect To Router. After checking out every reason and its solution, try to connect with your router. So, in this way, you will get your issue resolved. In case, still there is an issue with Linksys Smart WiFi Can't Connect To Router, then contact our expert team. They will provide you with an instant solution with full-fledged steps. So, from now onwards, there won’t be any more connection problems. So, get connected successfully with this guide.
Location: Phoenix, AZ, USA

Comments

Post a Comment

Popular posts from this blog

How To Resolve If Linksys Parental Controls Are Not Working?

  With the regular change in technology, the lives of the people keep on changing with time. Nowadays the lives of people are highly dependent on networking devices. When it comes to choosing the best Router, Linksys routers usually meet the minds of many people. It offers remarkable opportunities to keep the internet connection stable as well as secure. With the help of the Linksys Parental Controls feature, you can easily filter on the website and also block inadvertent access to inappropriate websites. But some people may face Linksys Parental Controls Are Not Working issues. If you want to resolve this issue, then take the guidance of the professionals. Get complete guidance from experts to get rid of the linksyssmartwifi not working issue. Reasons behind Linksys Router Parental Controls Not Working Before we proceed with troubleshooting the issue, sometimes the Linksys smart WiFi parental controls are not working. This is crucial when you identify the reason behind the issue. Her
Read more

Linkssmartwi-fi.com: How To Setup Linksys Smart WiFi Router

  There is a wide range of companies which design the best quality of networking devices. But when it comes to choosing the best Wireless Router, then Linksys Smart WiFi Router usually encounters the mind of many people. The performance of the Linksys Router is completely unmatched with any other Router’s available in the market. To set up the Linksys Wifi Router is quite easy. For more information regarding the Linksys Smart Wi-Fi Setup , take the help of the experienced technical team of professionals. You may also refer to the Router’s device manual to get more information about it.  Steps to Setup Linksys Smart WiFi Router Linksys router needs to be accessed either by using the http://linksyssmartwifi.com or with the help of the Local IP 192.168.1.1 in order to get to the setup web page of the router for the update. Here are the simple steps which you need to perform for the Linksys smart wifi setup: The first step is to open the new web browser of the computer system and then car
Read more

How To Log In To A Linksys Router?

If you have got yourself a new Linksys router and want help in how you can log in to start using the best network experience. If you want to change, modify, or set some advanced network settings to your Linksys wifi router then you need to login to the router’s admin page and make the desired settings. Then, you have landed on the right spot. We will explain here  how to log in to a Linksys router  by following some really easy steps. The login process is not at all complicated, it just requires you to do it carefully because any sort of typing or spelling error can hinder the smooth login process to the Linksys router.   Hardware Setup Of The Linksys Router- Before going to the login setup ensure you have properly made the physical setup of the router. Firstly, connect the computer via a cable to your router to access the login page of the Linksys wifi router. Ensure that the connection is stable and also make sure that your computer does not connect to the other Linksys routers in th
Read more